Hydraulic hedge cutter. Long hedges, cut cleanly.
The hydraulic hedge cutter for mini skid steers guides its 1,300 mm cutter bar on a swing arm vertically, horizontally and at an angle. That way you can tackle long hedges with the right loader and attachment combination.
€3,189.08net · excl. VAT€3,795gross · incl. VAT
- 1,300mmCutting width
- 4,900mmReach up to
- 25mmBranch thickness up to
- 204kgWeight
What it can do
Built tough.Easy to use.
The hydraulic hedge cutter for mini skid steers guides its 1,300 mm cutter bar on a swing arm vertically, horizontally and at an angle. That way you can tackle long hedges with the right loader and attachment combination.
- 01Swivels in every directionVertical for the sides, horizontal for the top, angled for embankments.
- 02Reaching highTogether with the lift arm, the cutter reaches up to 4.9 metres high, without ladders or scaffolding.
- 03Clean cutsThe cutter bar cleanly cuts shoots and branches up to 2.5 cm thick.
Photos & videos
Hedge cutterat work.
Technical data
Hedge cutterin detail.
Manufacturer's figures.
- Dimensions
- 1,670 × 810 × 1,900 mm
- Weight
- 204 kg
- Working width
- 1,300 mm
- Vertical reach
- 2,900 mm
- Reach with loader
- 4,900 mm
- Side reach
- 1,800 mm
- Branch thickness
- up to 2.5 cm
- Oil flow required
- from 42 l/min
- Connection
- double-acting with return line
- Mounting
- CII quick-attach plate
Versions & prices
| Version | incl. VAT | net | Enquiry |
|---|---|---|---|
| Hedge cutter | €3,795 | €3,189.08 | Enquire |
Fits
Fits allMinimog machines.
The hedge cutter fits the CII quick-attach plate of the Minimog mini skid steers.
Attachment system of the mini skid steers
Frequently askedquestions.
Anything else? Give us a call: +49 2747 9121752
Will the hedge cutter fit my machine?
The CII mounting is the same on all Minimog mini skid steers. We check whether the attachment suits your machine by looking at hydraulics, couplings and attachment weight.
Can I test the hedge cutter first?
Of course. We bring a machine and the hedge cutter to you and try it out on your ground.
Can I buy the hedge cutter without a machine?
Yes. If you already have a mini skid steer with a matching CII mounting, you can buy the hedge cutter on its own.
On-site demonstration
Not more staff.The right tool.
If your machines keep hitting their limits, you usually don't need more people, you need the right equipment. The best way to see that is on your own ground: we bring the Minimog to you, within 150 km of Elkenroth. You decide afterwards.
- Tell us briefly what it's aboutAccess, ground conditions and what needs moving.
- We give you a calland work out which machine and attachment suit you.
- We bring the machine to youand you try it out on a real job.
Demonstration slots are limited, because every demonstration takes place on a real job.
Your enquiry · takes one minute
What can we help you with?