Digging bucket
For trenches, planting holes and excavation. Choose the width that suits your job.
from €99
The Rippa R13 Pro is the mini digger for tight access: only 750 mm wide, with a short tail and knuckle boom for trenches right next to walls and fences. The three-cylinder Kubota delivers 14 hp. Knuckle boom, joystick controls and adjustable undercarriage are included in the price.
from€10,495.80net · excl. VATfrom€12,490gross · incl. VAT
- 14hpEngine power
- 1.8mDigging depth
- 1,300kgOperating weight
- 750mmWidth
The nimble one with knuckle boom.
Only 750 mm wide.Digs right next to the wall.
The Rippa R13 Pro mini excavator is the mini digger for tight access: only 750 mm wide, with a short tail and knuckle boom for trenches right next to walls and fences. The three-cylinder Kubota delivers 14 hp. Knuckle boom, joystick controls and adjustable undercarriage are included in the price.
from€10,495.80net · excl. VATfrom€12,490gross · incl. VAT
01 · Adjustable undercarriage
Narrow through the door, wide when digging.
With one lever, you change the track width hydraulically from 750 to 990 mm in seconds. Narrow, the R13 fits through doors, garden gates and tight passages; wide, it stands securely when digging. You widen the dozer blade to match: pull the pin, fit the side piece, done.
02 · Knuckle boom and short tail
Working right next to the wall.
The knuckle boom comes as standard: it swings the boom 50° to the right and 55° to the left, so you can dig trenches parallel to walls and fences. The tail turns in a radius of only 506 mm and overhangs the track by just 60 mm. In awkward gardens and on tight sites, nothing gets caught.
03 · The engine
Three-cylinder Kubota with 14 hp.
The water-cooled Kubota D722 delivers 10.2 kW, runs smoothly and meets emission Stage V. It uses 1.1 to 1.5 litres of diesel per hour. The bonnet opens fully to the rear: engine, air filter with primary and secondary element and tank are exposed for maintenance.
04 · Controls
Joysticks and travel levers at the front.
The pilot controls with joysticks on both sides work precisely and accurately, and two buttons on each grip control further functions. The travel levers sit at the top front and leave plenty of room for your feet. The safety lever prevents the engine from starting and locks the hydraulics against unintended operation. You adjust the seat with belt in four steps.
05 · Built for everyday work
Protective canopy, LED and connections.
The canopy with steel mesh withstands an impact of 200 kg and protects against falling material; the front guard folds down for transport. LED headlights illuminate the working area. The boom cylinder sits at the rear and is protected while working. Two two-way valves for hydraulic attachments are fitted as standard.
Also for hire
Hire first.Then decide.
You can also hire the Rippa R13 Pro from us, at fixed prices including VAT. If you'd like to buy afterwards, we're happy to advise.
- Day€1088 operating hours
- Week€4405 days
- Month€1,32020 days
- Delivery Flat rate of €80 within 10 km of Elkenroth, further by arrangement. Or collect the digger yourself.
- Handover You receive the digger clean and fully fuelled, and return it the same way.
- Daily hire A hire day covers 8 operating hours, a week 5 and a month 20 hire days.
Matching attachments
One machine.Many tools.
Bucket, rake, auger or breaker: via the two two-way valves, the R13 Pro also drives hydraulic tools. All accessories with prices are listed directly below.
AccessoriesDigging bucketFor trenches, planting holes and excavation, in widths from 20 to 80 cm.from €99
Accessories for the R13 Pro
The right tool.With price.
All prices include VAT. Choose a width or version and add the tool to your enquiry. We agree the final set-up with you.
01
Buckets
Digging, excavating, grading
Grading bucket
For spreading and grading loosened soil and for finishing surfaces.
from €98
Hydraulic tilt grading bucket
The hydraulic tilt helps you shape embankments and adapt to sloping ground.
from €465
Rake
For gathering roots, branches and coarse material on the worked area.
from €145
02
Gripping & breaking
Hold, move, rip
Thumb
Holds material against the bucket and helps you pick up individual stones, branches or components.
from €94
Mechanical grab
For picking up and moving coarse material that is hard to hold with a bucket.
€375
Ripper tooth
Loosens hard ground locally before you dig it out with the bucket.
€106
03
Hydraulics & quick change
Drilling, breaking, fast changeovers
Hydraulic auger
For drilling at specific points, for example along a planned fence line. We agree the auger diameter and ground conditions with you.
€490
Hydraulic breaker
For breaking hard materials. Tell us about the structure and material so we can put together the right set-up.
€759
Quick coupler
Change buckets and tools without re-equipping the machine for every job.
from €345
These accessories fit the Rippa R13 Pro. The mini skid steers have their own attachment system; you'll find their attachments under Attachments.
Technical data
All figuresat a glance.
01Engine & power
- Engine
- Kubota D722, diesel, 3 cylinders, water-cooled
- Power
- 10.2 kW / 14 hp
- Emission stage
- EU Stage V
- Displacement
- 0.719 l
- Consumption
- 1.1 up to 1.5 l/h
02Hydraulics
- Hydraulics
- 25 l/min (gear pump)
- Hydraulic pressure
- 180 bar, max. 200 bar
- Controls
- Pilot controls on both sides
- Connections
- 2 two-way valves for attachments
03Driving
- Undercarriage
- Rubber tracks, hydraulic track width 750 to 990 mm
- Travel speed
- 0 to 1.5 / 2.8 km/h, two travel speeds
- Gradeability
- 30 %
04Dimensions & weight
- Operating weight
- 1,300 kg
- Transport width
- 750 mm
- Transport length
- 2,114 mm
- Transport height
- 2,289 mm
- Blade width
- 750 up to 990 mm
- Bucket capacity
- 0.03 m³
05Working range
- Max. digging depth
- 1,843 mm
- Max. digging radius
- 3,346 mm
- Max. digging height
- 3,011 mm
- Max. dumping height
- 2,238 mm
- Max. digging force
- 9.8 kN
- Boom swing
- 50° right, 55° left
06Further data
- Tail radius
- 506 mm, overhang 60 mm
Figures from the manufacturer's data sheet. Prices include VAT. Brochure as PDF (English, 5.5 MB) →
Profitability · Rippa R13 Pro
Buy, hire or keep working by hand?
Work out with your own working days when the Rippa R13 Pro pays for itself: with depreciation, residual value, interest, fuel and wear, against the same work done by hand or with a hire machine.
Instead of buying
Working days per month 8
Hours per day 4
Months per year 10
Wage per working hour €55
–years
Result · all values net
–
Benefit per month–
Per working day–
Pays off from–working days a month
Financing*–
Cumulative costs over 5 years
BuyManual work
* Non-binding example calculation using average values, not a financing offer.
Goes well with
Smaller, bigger.Or haul material.
Even lighter is the R10 Eco; the R15 Eco has more weight and reach. If you then need to haul away the spoil, spread gravel or move pallets, a mini skid steer helps. Whether it fits through your access is shown in the comparison of all models with gate check.
- ≥915 mmWidth
- 25 hpPower
- 1,555 kgTipping
- ~8 km/hSpeed
VMENG
SAM 1200
Our bestseller.
Its large Kubota engine pulls hard even at low revs. That's easy on the machine and the fuel budget, day after day.
from€19,800net · excl. VATfrom€23,562gross · incl. VAT
- up to 11 hpPower
- 1.8 mDepth
- 1,000 kgWeight
- 912 mmWidth
Rippa
R10 Eco
The ultra-compact pocket powerhouse.
Only 912 mm wide and 1,000 kg light: the R10 Eco fits through most doors and gates and still digs 1.8 m deep. Accessories and upgrades are on its product page.
from€4,680.67net · excl. VATfrom€5,570gross · incl. VAT
- 14 hpPower
- 1.8 mDepth
- 1,500 kgWeight
- 980 mmWidth
Rippa
R15 Eco
Your mini digger for garden and construction.
Digging trenches, excavating foundations and shaping your own garden: the R15 Eco combines 1,807 mm digging depth with a Kubota diesel. Buckets and other accessories are on its product page.
from€10,075.63net · excl. VATfrom€11,990gross · incl. VAT
On-site demonstration
Not more staff.The right tool.
If your machines keep hitting their limits, you usually don't need more people, you need the right equipment. The best way to see that is on your own ground: we bring the Minimog to you, within 150 km of Elkenroth. You decide afterwards.
- Tell us briefly what it's aboutAccess, ground conditions and what needs moving.
- We give you a calland work out which machine and attachment suit you.
- We bring the machine to youand you try it out on a real job.
Demonstration slots are limited, because every demonstration takes place on a real job.
Your enquiry · takes one minute
What can we help you with?