01Engine & power
- Engine
- Kubota D1105, diesel, 3 cylinders, water-cooled
- Power
- 18.4 kW / 25 hp
- Emission stage
- EU Stage V
The Derette XC1100 is the logical evolution of the V1000: a 25 hp Kubota diesel, pilot control with float position and a width of only 900 mm. We check together with you whether it fits through your access: with attachment, bends and side clearance.
from€15,900net · excl. VATfrom€18,921gross · incl. VAT
- 25hpEngine power
- from900mmWidth
- 1,454kgTipping load
- up to5.8km/hTravel speed
The newcomer with pilot control.
Precisely controlled.Strong when lifting.
The Derette XC1100 mini skid steer is the logical evolution of the V1000: a 25 hp Kubota diesel, pilot control with float position and a width of only 900 mm. We check together with you whether it fits through your access: with attachment, bends and side clearance.
from€15,900net · excl. VATfrom€18,921gross · incl. VAT
Original photographs
A closer look at the XC1100
01 · Compact build
Fits through a garden gate.
With an overall width of only 900 mm, you get through doors, garden gates and onto cramped sites. If you need more stability, choose the wider rubber track with 230 instead of 200 mm, making it 950 mm. And because it stays compact, it's quickly loaded and transported.
02 · Drive and hydraulics
Kubota diesel, branded hydraulics.
The water-cooled Kubota D1105 delivers 25 hp with plenty of torque and low consumption. The closed hydraulic system from Hansa delivers up to 56.8 l/min to the attachments, the travel motors come from Inpro and the control valves from Walvoil. The coupling between engine and pump is designed for more than 2,000 operating hours.
03 · Pilot control
Drive with one hand, work with the other.
The pilot control separates driving and working: with one hand you steer the loader, with the other you move lift arm and bucket at the same time. The float position lets the attachment follow the ground. The new throttle lever responds quickly and precisely, and the LCD display shows all operating and temperature values.
04 · Attachments
More than just a bucket.
Stump grinder, post hole auger, skidding tongs or pallet forks: with the right attachment, the XC1100 becomes the tool for exactly your job. Attachments are changed on the CII quick-attach mounting, and you connect the hydraulics via the quick couplings on the arm.
05 · Built for everyday work
Built for long working days.
A clear all-round view, easy getting on and off and a padded standing platform with dead man's switch. The side grilles come off on both sides, and engine, battery, filters and oil drain are easy to reach. The parking brake holds the machine securely on slopes, and fixed lashing points make loading easy.
From the field
The XC1100.On a real job.
With pallet forks, skidding tongs and post hole auger: see the XC1100 with the attachments it works with outdoors.
Job filmDerette · XC1100
0:000:00
How does it work on your ground?
Book a demonstrationMatching attachments
One machine.Many tools.
All attachments fit the same CII quick-attach mounting. We check with you beforehand whether the Derette XC1100's hydraulics are up to a given attachment.
AttachmentStump grinderStumps gone, without a digger or a special machine. Works to the left and right.from €3,650 incl. VAT
Technical data
All figuresat a glance.
02Hydraulics
- Hydraulics
- 56.8 l/min flow, pump 48 l/min
- Pressure at the quick couplings
- 200 bar
- Controls
- Pilot control with float position
03Driving
- Travel speed
- 5.8 km/h forwards, 5.0 km/h backwards
04Dimensions & weight
- Operating weight
- 1,690 kg
- Tipping load
- 1,454 kg
- Lifting capacity
- 750 kg
- Width
- 900 mm / 950 mm (track 200 / 230 mm)
- Tank capacity
- 40 l diesel, 35 l hydraulic oil
Figures from the manufacturer's data sheet. Prices include VAT. See original data sheet →
Profitability · Derette XC1100
Buy, hire or keep working by hand?
Work out with your own working days when the Derette XC1100 pays for itself: with depreciation, residual value, interest, fuel and wear, against the same work done by hand or with a hire machine.
Instead of buying
Working days per month 8
Hours per day 4
Months per year 10
Wage per working hour €55
–years
Result · all values net
–
Benefit per month–
Per working day–
Pays off from–working days a month
Financing*–
Cumulative costs over 5 years
BuyManual work
* Non-binding example calculation using average values, not a financing offer.
More machines from Derette
Perhapsanother model fits better.
The Derette mini skid steers are the narrow and affordable way in: from the DRT 450 with a Honda engine to the V1000 and XC1100 with a Kubota diesel. Whether the Derette XC1100 or another mini loader better suits your access and attachments is shown in the comparison of all models with gate check.
- 900 mmWidth
- 25 hpPower
- 1,315 kgTipping
- 5.8 km/hSpeed
Derette
V 1000
Incredibly strong and narrower than any other.
More tipping load and a float position on the lift arm: the V1000 fits through a garden gate and works like a big machine. Unique in its class.
from€13,950net · excl. VATfrom€16,660gross · incl. VAT
- 1,030 mmWidth
- 25 hpPower
- 390 kgLifting capacity
- 4.5 km/hSpeed
Derette
DRT 450
Facelift: even more comfortable.
The affordable way in, with a Honda engine and automatic self-levelling. Bucket and forks always stay level when lifting.
from€7,950net · excl. VATfrom€9,460gross · incl. VAT
On-site demonstration
Not more staff.The right tool.
If your machines keep hitting their limits, you usually don't need more people, you need the right equipment. The best way to see that is on your own ground: we bring the Minimog to you, within 150 km of Elkenroth. You decide afterwards.
- Tell us briefly what it's aboutAccess, ground conditions and what needs moving.
- We give you a calland work out which machine and attachment suit you.
- We bring the machine to youand you try it out on a real job.
Demonstration slots are limited, because every demonstration takes place on a real job.
Your enquiry · takes one minute
What can we help you with?